RAB FFLED39 39 Watt LFLOOD LED Flood Lights Rectangular shaped LED floodlight designed to replace 150W Metal Halide. Patent Pending airflow technology ensures long LED and driver lifespan. Use for building facade lighting, sign lighting, LED landscape lighting and instant-on security lighting.
NEMA Type: 7H x 6V Beam Spread
Ambient Temperature: Suitable for use in 40C ambient temperatures.
Cold Weather Starting: The minimum starting temperature is -40F/-40C.
Color Stability: RAB LED products exceed industry standards for chromatic stability.
Color Accuracy: 68 CRI
Color Temperature(Nominal CCT) 5100K
UL Listing: Suitable for wet locations. Suitable for moutning within 4' of the ground.
Warranty: Fixture and light engine components are backed by RAB's 5 year warranty.

|  | RAB STL360H Stealth 360° with Bell Floods Motion Sensor Lights RAB STL360H, RAB STL360HW - Stealth with Bell Floods
Two sensors in one to monitor 180° in front and 360° below
New feature turns lights on at dusk for 0-8 hours and protects with motion
when timed out till AM.
Time adjustment for motion sensor is 5 sec. to 12 min.
1000 watt switching capacity
6000 volt surge protection
Temperature Compensation for reliable all weather performance
Superb Radio Frequency Immunity (RFI). Not affected by cell phone or other
stray signals
White(RAB STL360HW) or Bronze(RAB STL360H) finish
LED Indicator and extensive instruction manual insure trouble-free installation
1/2" threaded attachment arm
Includes two die cast bell shielded floods

|  | RAB STL200 Stealth 200° Motion Sensors By far the best sensor you could buy!
1000 watt switching capacity
Covers 200ø wide x 40' range
Surge Protection
Temperature Compensation for reliable all weather performance
Superb Radio Frequency Immunity (RFI). Not affected by cell phone or other stray signals
White(RAB STL200W) or Bronze(RAB STL200) finish
LED Indicator and extensive instruction manual insure trouble-free installation
1/2" threaded attachment arm
Use with any incandescent or Quartz floodlights
Dimensions: 3« H x 5" W x 5" Ext
specsheet
instructions

|  | RAB LOS800 Smart Switch 800 Watts, 3 Wire Motion Sensor Light Switch Replace your light switch with a RAB LOS800W (white) or RAB LOS800I (ivory) Occupancy Sensor just like the sensor light switch in high end office buildings at a fraction of the cost. Turns lights on and off automatically when rooms are unoccupied to save energy. Fits standard decorator wall plates. Full 180° view covers 1000 sq. ft. Works with electronic ballasts. Can be wired in parallel. LED indicator, wall plate included. Can also be used as a ceiling sensor. Must have hot, common & ground wires in box.
Integral 8 amp relay controls 800 watts @ 120v, 1200 watts @ 277v
On Time adjustable from 30 seconds to 15 minutes
LED detection indicator
Order 120 volt (LOS800W/120, LOS800I/120) or 277 volt models (LOS800W/277, LOS800I/277)
Available in white or ivory
Wall Plate Included
Switch allows for Manual Off Mode
Click here to see more Occupancy Sensor Switch options

|